#onshape #robotics #firsttechchallenge
Locking the robot to the origin is a good practice in FTC whenever you make a new onshape assembly and insert the baseline robot chassis. In this example, we will use the goBilda Strafer Chassis and demonstrate locking it to the origin, in the correct orientation. The orientation is important for using the corners of the viewcube.
IMPORTANT NOTE: This video did not showcase making the mate connector. Making the mate connector is not require, it just makes finding the x-axis easier when you fasten it. Also, when you fasten it be sure to fasten the U-Channel to the origin’s x-axis, otherwise the orientation will be wrong.
[ad_2]
source
Related Articles
