CUAV X7+ Flight controller connects to Here 3 GPS setup and testing
1. Go to Mission Planner to set the parameters.
2. Select port and baud rate and connect. (The port number of each device is different. Select the port marked with MAVLink)
3. Calibrate the compass, Each axis of the drone has to rotate 360 degrees.
4. Tested GPS is normal, and the drone can be unlocked normally.
Know about World Drone Market from:
Official Website :
Facebook :
CUAV X7 + Autopilot Flight Controller :
Skydroid H16 Remote Controller:
Here 3 CAN GNSS:
[ad_2]
source
